Handling fragile and delicate goods with forklifts is a common scene in modern warehousing and manufacturing logistics, and standardized operation can effectively reduce the damage rate of special goods and avoid unnecessary economic loss.
Before starting the formal handling task, operators need to complete sufficient pre-judgment and preparation work first. You need to confirm the basic attributes of the goods in advance, including weight, packaging material, fragile parts location and stacking requirements, configure matching protective auxiliary tools such as non-slip soft pads, and do a full inspection of the electric forklift, focusing on checking the sensitivity of braking, steering and lifting system to eliminate potential equipment failures.
In the actual operation process, you need to follow the stable and slow principle all the time. Keep the bottom of the goods 10 to 15 cm above the ground during driving, avoid sharp acceleration, sudden braking and sharp steering, slow down in advance when passing through uneven roads, ramps or narrow aisles, and ensure no obstacles on the driving route. When picking up and putting down goods, adjust the insertion position of the pallet fork to ensure the goods are evenly stressed, avoid unilateral stress which may cause extrusion or tipping damage.
After the handling work is finished, slowly withdraw the pallet fork horizontally to avoid scratching the outer packaging of the goods, then check the appearance of the goods to confirm no abnormal damage. We are Jianshu New Energy, specializing in BYD electric forklifts, if you need related product consultation and supporting operation guidance, you can contact us via email 17399989919@163.com.
