The inching pedal is a core functional component specially designed for electric forklift operation, which helps operators adjust the vehicle’s traveling speed in ultra-fine increments without frequently stepping on the brake or shifting gears, greatly improving operation accuracy during narrow channel stacking, goods picking and short-distance docking scenarios.
First, it is necessary to clarify the core working logic of the inching pedal. Unlike the accelerator pedal that controls regular forward and backward speed, the inching pedal works by cutting off part of the power transmission while keeping the hydraulic lifting system in a continuous working state. When the operator presses the inching pedal gently, the traveling power of the forklift will decrease gradually, while the lifting, tilting and other hydraulic functions of the fork will not be affected, which ensures that operators can adjust the position of the fork extremely slowly when aligning the goods pallet, without causing the goods to shift or fall due to sudden movement of the vehicle.
Next is the standard operation flow of the inching pedal. Before formal operation, the operator needs to confirm that the forklift is in a low-speed working gear, and the goods on the fork are kept at a safe height of 15 to 20 cm from the ground. When the vehicle drives to the position 30 to 50 cm away from the target stacking position, the operator can slowly move the right foot from the accelerator pedal to the inching pedal, and control the pressing depth of the pedal according to the actual distance from the target position. When the pedal is pressed to a certain depth, the traveling speed of the forklift will be reduced to the per-second centimeter level, so that the operator can finely adjust the fork position to complete the accurate pallet insertion or stacking action. After the operation is completed, release the inching pedal slowly, and move your foot back to the accelerator pedal or brake pedal according to subsequent operation requirements.
There are several common operational misunderstandings that need to be avoided in daily use. First, do not press the inching pedal to the maximum stroke for a long time, which will cause the power system to keep in a semi-disconnected state, increasing unnecessary energy consumption. Second, do not use the inching pedal instead of the brake pedal for conventional deceleration, which will not give full play to the brake system’s functional advantages, and will also accelerate the wear of relevant power transmission components. Third, it is not recommended to use the inching pedal for long-distance low-speed driving, which will affect the continuous output efficiency of the whole vehicle.
As a professional supplier focusing on new energy electric forklifts, Jianshu New Energy specializes in BYD electric forklift products, and can provide targeted operation guidance and after-sales support for all operating personnel of purchased equipment, helping every user form a standardized operation habit, give full play to the performance advantages of the equipment, and complete various material handling work stably and efficiently.
