Low temperature cold storage environment has special requirements for forklift performance and operation specifications due to low temperature and high humidity. For such scenarios, lithium-ion forklifts are widely used due to their stable low temperature adaptability. The following are the specific instructions for the use of this forklift in low temperature cold storage.
It is necessary to make comprehensive preparations before starting. First, check the battery status. The battery activity will decrease in the low temperature environment. It is necessary to confirm that the battery is fully charged, and the appearance is not damaged or leaking. Secondly, check the integrity of all parts of the forklift, including tire pressure, brake system, steering mechanism and fork, to ensure that there are no abnormalities in each part before starting the equipment. When starting, it is necessary to idle for 2 to 3 minutes to allow the hydraulic system and power system to gradually adapt to the low temperature environment and avoid direct full load operation.
During the operation, it is necessary to follow the standard operation. When driving, it is necessary to reduce the driving speed. The ground of the cold storage is easy to freeze and skid, maintain a safe distance between vehicles, and avoid sudden acceleration, sudden braking and sharp turns. When loading and unloading operations, it is necessary to confirm that the goods are stacked firmly. When the fork is inserted into the bottom of the goods, it is necessary to ensure that the depth is sufficient, and the lifting and descending speed is slowed down to prevent the goods from slipping or the equipment from shaking. If abnormal conditions such as insufficient power and abnormal noise of parts are found during the operation, the operation should be stopped immediately and evacuated to a safe area to
After the operation, do a good job of maintenance. After the operation, the forklift needs to be driven out of the cold storage and placed in a dry environment at room temperature to avoid staying in a low temperature and high humidity environment for a long time. Clean up the frost and water stains on the surface of the forklift in time to prevent parts from rusting. Regularly check the charging status of the battery and charge it according to the specified cycle to avoid excessive discharge. In addition, the hydraulic system and brake system of the forklift need to be lubricated and overhauled regularly to ensure that all components can operate normally in a low temperature environment.
