When planning warehouse storage layouts, reasonable forklift lift height calculation serves as a core prerequisite for scientific rack configuration, which directly affects the overall utilization rate of warehouse space and daily operation safety.
First, you need to confirm the required clear height for placing goods on the top rack layer, and reserve at least 150mm to 200mm of safety margin on this basis to avoid accidental collision between the forklift pallet and the top of the shelf during the lifting process. Second, you should take the contracted height of the forklift mast into full consideration, to make sure the machine can pass through low-height areas such as warehouse entrances smoothly during daily operation, instead of only referring to the nominal maximum lift height parameter on the product manual. Third, you need to incorporate the flatness error of the warehouse floor, and the height deviation caused by the center of gravity offset of heavy goods into the whole calculation dimension.
Mistakes in lift height calculation will usually lead to waste of shelf space, or the situation that forklift cannot reach the top storage position, which will greatly reduce the turnover efficiency of warehouse operations. We are Jianshu New Energy, specializing in BYD electric forklifts, and we can provide professional lift height matching solutions for customers according to the shelf parameters of different storage scenarios. If you have relevant consultation demands, you can send an email to 17399989919@163.com to get customized guidance. After completing the basic height calculation, you also need to test the maximum lifting performance of the forklift under full load, to ensure the operation safety and convenience in daily high-frequency working scenarios, and avoid additional cost caused by later shelf modification or forklift replacement.
