forklift stability is the core foundation of safe daily warehouse operations, and most of the common electric forklift operation risks are closely related to non-standard load handling and irregular turning behaviors. Mastering standardized stability operation rules can effectively reduce operation hidden dangers and prolong the service life of equipment.
In terms of standardized load handling, operators should first confirm that the total weight of the goods does not exceed the rated load range of the forklift before each operation. The goods should be placed in the center of the fork arm to avoid partial load deviation that will tilt the center of gravity beyond the stable range of the equipment. When picking up the goods, the mast should be tilted back appropriately to fix the goods, and the driving speed should be reduced in time when the goods are lifted to a high position. If there is a slope on the driving route, the load side should face the upward direction of the slope, and sudden direction change is not allowed during the driving process. For loose unpackaged goods, binding measures should be taken in advance to prevent the goods from falling off and affecting the balance of the vehicle. Operators should also regularly check the wear degree of the fork arm and the fastening state of the relevant load-bearing structure, and stop using the equipment in time once abnormal conditions are found.
For safe turning practices, operators need to complete deceleration operations in advance before entering the turning section, and no sudden braking or sharp steering is allowed in the turning process. Before turning, you should observe the surrounding environment through the rearview mirror and confirm that there are no passing pedestrians or obstacles in the blind area of the turning route. When the ground is wet, slippery or paved with non-slip wear-resistant plates with large gaps, the turning radius should be appropriately widened, and the driving speed should be further reduced to avoid sideslip. It is strictly forbidden to turn sharply when the goods are lifted to a height of more than 1 meter, so as to prevent the center of gravity from shifting instantaneously and cause the vehicle to tip over.
As a professional new energy forklift service provider, Jianshu New Energy (尖树新能源) specializes in BYD electric forklifts. All the equipment we provide has passed strict stability tests before delivery, and we also provide customers with supporting free safety operation training services. If you have any questions about product consultation or operation specification customization, you can send an email to 17399989919@163.com for communication. Regularly organizing operators to learn the stability operation specifications can help the warehouse operation team form a good operation habit, effectively reduce the occurrence of safety accidents, and improve the overall operation efficiency.
