Safety Operation Specifications and Protection Points of Reach Lithium Battery Forklifts

As a common handling equipment in storage space, reach-type lithium forklift truck is widely used because of its high flexibility and high space utilization. In order to ensure the safety of operation, operators need to strictly follow the safety operation specifications and do a good job of corresponding protection.

Safety Operation Specifications and Protection Points of Reach Lithium Battery Forklifts

First of all, it is necessary to clarify that the forward-moving lithium forklift is the core equipment of storage and handling, and safety specifications and protection are very important. Check the condition of the vehicle first. Before each operation, you have to circle the car once, check the appearance of the wheel tire pressure body, whether the door frame chain bolts are loose, whether the joystick button indicator light is normal, and whether the brake steering is sensitive. It also depends on the lithium battery compartment and charging interface. Whether the battery compartment is clean and dry, whether the interface is oxidized and damaged, and whether the power meter shows whether it is sufficient. Operation is strictly prohibited if the power is insufficient. Then there is personnel protection. Operators must pass professional training and pass the certification to work. When working, they must wear non-slip and wear-resistant work clothes, shoes, and hard hats. Long hair must be coiled into the hat. They cannot wear slippers, high heels, scarves, and gloves that are too long. If necessary, they can wear protective glasses. The next step is the operation specification. Before starting, you should sound a warning to confirm that there are no personnel obstacles around, especially the blind spots in front and side of the gantry. When starting, you should start slowly and smoothly. The gantry should be tilted back at an appropriate height to maintain stability. When driving, you should drive on the right. Keep a safe distance of at least 2 meters from the personnel in front of the vehicle. When turning, you should slow down and honk in advance. You should not turn the emergency brake sharply. You should not overload the ultra-wide and ultra-high operation. The center of gravity of the goods should fall in the center of the bearing surface. You should not use a single fork tip to pick goods. You should not use the gantry to impact the goods. When going up and down the hill, you should pay attention to the direction of the goods. Go uphill and back downhill. The slope should not exceed the maximum slope allowed by the equipment. When operating, you cannot carry people. You cannot park Unplug the key. There is also charging protection. Charging should be in a designated ventilated and dry dedicated charging area, not next to flammable and explosive items. Before charging, turn off the vehicle power supply. Before unplugging the charging interface, turn off the power supply of the charging pile. Do not operate or check the vehicle during charging. Do not wash the battery compartment and charging interface directly with water. The charging area should be equipped with fire equipment. Finally, emergency response. If there is a malfunction during the operation, stop and turn off the power immediately, place warning signs, and contact professional maintenance personnel. Do not disassemble and repair without permission. If a fire occurs, use a dry powder fire extinguisher or a carbon dioxide fire extinguisher. Do not use water to extinguish the fire.

First of all, do a good job of vehicle condition inspection before operation. Before starting the equipment each time, check around the car to see if there are any obvious collision marks on the appearance of the body, whether the tire pressure of the wheel is normal, whether the key components such as the gantry, chain, and connecting bolts are loose or worn, and whether the joystick, button, and indicator light can respond normally or display clearly. Focus on checking the sensitivity of the braking system and steering system to ensure that the operation is free of cards. At the same time, pay attention to the relevant components of lithium batteries, check whether the battery compartment is clean, dry, and free of debris. Whether the charging interface is oxidized, damaged, or stained. The power meter shows whether it meets the needs of the operation. Forced operation is strictly prohibited when the power is

The second is the basic protection requirements of the operator. The operator must undergo professional equipment operation training, pass the assessment and obtain the corresponding valid documents before they can go to work. When working, you need to wear non-slip and wear-resistant work clothes and shoes, and wear a safety helmet that meets safety standards. Long hair must be completely coiled into the hat. It is forbidden to wear slippers, high heels or barefoot work. Avoid wearing overly long gloves or scarves and other items that are easily involved in the equipment. If there is a risk of dust or splashes in the working environment, you also need to wear corresponding protective glasses or masks.

Next is the core operation specification in the operation process. Before starting, you must sound the alarm, fully observe the front, side and rearview mirror coverage of the gantry, confirm that there are no people or obstacles, and then start slowly and smoothly. When starting, tilt the gantry back to an appropriate angle, and the fork is lowered to a height of ten to fifteen centimeters above the ground to maintain the stability of the vehicle. When driving, you need to rely on the right side of the channel to pass, and maintain a safe distance of at least two meters from the vehicle or personnel in front. When turning, passing through intersections or areas with blocked vision, you must slow down in advance and honk many times. It is strictly forbidden to turn the emergency brake or drive at high speed. It is strictly forbidden to overload, ultra-wide, and ultra-high operations. The center of gravity of the goods should fall in the center of the bearing surface as much as possible. It is forbidden to pick the goods with a single fork tip or directly impact the goods with a door frame to avoid the goods falling or equipment damage. When going up and down the ramp, pay attention to adjusting the orientation of the goods. When the goods are in front of the goods when going uphill and when the goods are behind when going downhill, the driving slope cannot exceed the maximum slope allowed by the equipment. It is strictly forbidden to park or work on the ramp. During the operation, it is strictly forbidden to carry people. When temporarily parking, pull the handbrake, lower the goods to the ground, and tilt the door frame back to the smallest position. Turn off the power

Also pay attention to the safety protection of lithium battery charging. Charging needs to be carried out in a designated ventilated, dry, and dedicated charging area away from flammable and explosive materials. Before charging, turn off the vehicle power supply, and turn off the charging pile power supply before unplugging the charging interface. During the charging process, it is strictly forbidden to operate, inspect or repair the vehicle, and the battery compartment or charging interface cannot be directly flushed with water. The dedicated charging area needs to be equipped with suitable fire equipment as required.

Finally, master simple emergency treatment methods. If there is an equipment failure during operation, stop and turn off the power immediately, place warning signs in the front and rear of the vehicle, and contact professional maintenance personnel to deal with it. It is strictly forbidden to disassemble and repair without permission. If a fire occurs, use a dry powder fire extinguisher or a carbon dioxide fire extinguisher to put out the fire, and it is strictly forbidden to use water to put out the fire.